![background image](http://html1.mh-extra.com/html/gehl/z17-gen-2/z17-gen-2_operators-manual_2205853185.webp)
25. Procedures for Maintenance
3-57
9) Clean the area around the oil supply port (F) on the top
of the hydraulic oil tank with a cloth. Slowly loosen and
remove the oil supply port cap (F).
10) After draining the waste oil, install and tighten the
drain plug (P).
Tightening torque : 115.7 to 137.4 ft•lbf (156.9 to 186.3 N•m)
11) Loosen the hose bands (4) and remove the hose (6)
from the suction filter (5).
12) Remove the suction filter (5). Then, remove dirt from
the suction filter (5) and wash it with a washing agent
or light oil.
13) Check the suction filter (5). If the suction filter (5) is
damaged or cracked, replace it with a new one.
14) Replace the O-ring on the threaded portion of the suc-
tion filter (5) with a new one, and install the suction fil-
ter with the new O-ring in the hydraulic oil tank.
Tightening torque : 72.3 to 87.0 ft•lbf (98 to 118 N•m)
IMPORTANT
Do not allow any dirt to enter the hydraulic oil tank
when installing the suction filter.
15) Install the hose (6) to the suction filter (5) and tighten
the hose hands (4).
Tightening torque : 1.8 to 2.5 ft•lbf (2.5 to 3.4 N•m)
16) Add oil to the specified level through the oil supply port.
Check the oil level with the oil level gauge (G) on the
left side of the machine and do not add oil beyond the
midpoint between the upper and lower limit marks on
the oil level gauge (G).
Refer to Section "21. Fueling, Oiling and Greasing
Based on Temperature Range" for the oil to be used.
17) Install the oil supply port cap (F).
18) After replacing the oil, set all control levers to the neu-
tral position and idle the engine for approximately 2 to
3 minutes, and then test each implement for proper
operation.
19) Install the side cover L (3).
20) Close the engine hood (2).
21) Install the hydraulic oil tank cover (1).
(4)
(5)
(4)
(6)
020309-00X
(3)
(2)
(G)
Upper limit
Lower limit
020216-00E
(4)
(5)
(4)
(6)
020309-00X
Summary of Contents for Z17 GEN:2
