Gehl Z17 GEN:2, Operator'S Manual

Page: 106 / 208

13. Operating Instructions
2-66
13-22-3. Operating attachment
If you use the oil pressure for other hydraulic devices as
the power source, connect the piping by using the follow-
ing procedure after the engine has stopped.
1) Close the stop valve.
2) Remove the screw plugs.
3) Connect the hose for the hydraulic tool.
4) Open the stop valve.
Operate the attachment as follows:
„
Precautions
• Make sure the stop valves are in the open position.
Refer to Section "13-22-2. Hydraulic circuit" for oil flow
system.
1) When using the breaker
The breaker operates when the P.T.O. pedal is moved to
the arrowed direction.
• Make sure the P.T.O. selector valve is in the single acting
position.
Refer to Section "13-22-1. Description of stop valve,
P.T.O. selector valve, P.T.O. pedal and pedal lock".
• Make proper use of the breaker following the handling in-
structions in the operation manual provided by the man-
ufacturer of the breaker.
2) When using general attachments such as tilt bucket
Move the P.T.O. pedal to the right or the left, and the at-
tachment operates.
When changing the hydraulic piping connection,
stop the engine and slowly loosen the connection
to release the inner pressure.
Open position
N
020360-00E
Single acting P.T.O.
N
Courtesy of Machine.Market