![background image](http://html1.mh-extra.com/html/gehl/z17-gen-2/z17-gen-2_operators-manual_2205853117.webp)
2-77
16. Long-term Storage
IMPORTANT
When storing the machine, set up the machine as illus-
trated in the figure at the right, to protect the hydraulic
cylinder rods from becoming corroded.
When storing the machine for a long period, do the following:
• Clean all parts and store the machine indoors. If you
have to store the machine outdoors, park the machine on
level ground and cover it with a protective sheet.
• Apply lube oil and grease to the machine and replace the
engine oil.
• Apply a small amount of antirust to exposed parts of the
hydraulic cylinder rods.
• Fill the battery with distilled water up to the upper level
mark. After the battery has fully recharged, disconnect
the negative terminal, and cover the battery or remove
the battery from the machine to store it.
• Add an anti-freeze to the cooling water if the air tempera-
ture can fall below 32°F (0°C).
Because a long-life coolant (LLC) is added to the cooling
water, you need not change it until the temperature falls
below -31°F (-35°C).
If the temperature falls below -31°F (-35°C), refer to Sec-
tion "25-2. Non-periodic services" to control the density
of the cooling water.
• Place the lock levers and the pedal guards to the lock po-
sition respectively.
• Antirust
When stored near the sea or in a place exposed to sea
breezes, the machine easily becomes rusty. Carefully ap-
ply an antirust to all exposed parts of the piston rods and
cover the machine with a polyethylene sheet or oil paper.
Some antirust solvent damages rubber materials. Be
sure to use the recommended antirust or its equivalent.
• To prevent condensation inside the fuel tank, either drain
the fuel tank or fill the tank completely.
16-1. Before storing
Recommended antirust
Manufacturer
P-1300 (Solvent cutback rust preventive oil)
Nihon Sekiyu
P-3 (Solvent cutback rust preventive oil)
Japan Energy
P-300 (Solvent cutback rust preventive oil)
Cosmo Sekiyu
Retract the bucket and arm cylinders to place
the bucket on the ground.
020337-00E
Summary of Contents for Z17 GEN:2
