![background image](http://html1.mh-extra.com/html/gehl/z17-gen-2/z17-gen-2_operators-manual_2205853165.webp)
25. Procedures for Maintenance
3-37
25-3-3. Checking and replenishing the fuel in the fuel tank
1) Turn the starter switch key to the "ON" position and
check the fuel level with the fuel meter. Add necessary
fuel to the fuel supply port.
When the fuel meter pointer is at “E”, approximately
1.32 Gals. (5 L) of fuel is left in the tank.
Fuel tank capacity : 5.28 Gals. (20 L)
See Section "21. Fueling, Oiling and Greasing Based
on Temperature Range" for the fuel to be used.
2) Insert the starter switch key and turn it counterclockwise
to unlock the cover (1) for the fuel supply port.
3) Open the cover (1) and add fuel to the fuel supply port.
4) After refueling, securely install and tighten the fuel sup-
ply port cap (2), and then close the cover (1).
5) Turn the starter switch key clockwise to lock the cover.
Note :
If the breather hole (3) in the cap is clogged, the pressure
in the tank will decrease and the fuel will not be delivered
adequately to the engine. Clean the engine breather hole
from time to time, to prevent that from happening.
Be careful not to overfill the fuel tank because it
could cause a fire. If the fuel tank is overfilled,
completely wipe off the spilled fuel.
• Do not remove the strainer from the fuel supply
port of the fuel tank when supplying fuel.
• Be careful not to allow any water that may be in
the fuel container or dirt on the refueling equip-
ment to enter the fuel tank.
000319-00X
(1)
Cover
Unlock
Open
Lock
020178-00E
020179-00X
(2)
(3)
020180-00X
Summary of Contents for Z17 GEN:2
