Gehl 383Z, Operator'S Manual

Page: 84 / 112

918196/EP0913 4-10 Printed in U.S.A.
Recommended Lubricants
Engine Oil
See
“Fluid Capacities/Lubricants
” on page 1-4 for
proper engine oil specifications.
Hydraulic Oil
See
“Fluid Capacities/Lubricants
” on page 1-4 for
proper hydraulic oil specifications.
Swing Ring
Lubricate with a heavy-duty lithium complex grease
with 3% molybdenum disulfide, such as Chevron RPM
Heavy Duty Grease No. 2, Mobilgrease Moly 52 or BP
Energrease Moly EP2.
Final Drive Unit
An EP grade gear oil that conforms to API GL5, such
as Chevron Delo Gear 80-W90 or BP Transgear 80-
W90 is required.
Swing Gear Unit
An EP grade gear oil that conforms to API GL5, such
as Chevron Delo Gear 80-W90 or BP Transgear 80-
W90 is required.
Lubrication Points
See Figures 4-1 and 4-2.
Apply a heavy-duty lithium complex grease with 3%
molybdenum disulfide. See
“Fluid Capacities/Lubri-
cants
” on page 1-4 for more detailed specifications.
Ranges of Applications
From –4° F to +104° F (-20° C to + 40° C) outside tem-
perature.
Engine
Checking Engine Oil Level
To check the engine oil, the machine must be on a level
surface with the engine turned off. Check the oil level
before starting the engine or at least five minutes after
shutting off the engine.
1. Push the engine cover latch button and raise the
engine cover.
2. Check the engine oil level using the dipstick (1)
located on the right side of the engine. See Figure
4-3.
3. Add oil if required through the oil filler neck (3).
See Figure 4-3.
4. Drain excess oil if required. See
“Changing
Engine Oil and Filter
” on page 4-11
.
Figure 4-3 Oil Dipstick and Filler Neck Loca-
tions
Note: Marks on the dipstick indicate the minimum and
maximum oil levels.
IMPORTANT
Be sure to read the engine manual supplied
with this machine for detailed engine speci-
fications.
IMPORTANT
See “Fluid Capacities/Lubricants ” on
page 1-4 for engine oil grade. To prevent
damage to the engine, only use the engine
oils specified, or oils of equivalent quality
and grade.
3
1
max
min