Printed in U.S.A.
3-11
918196/EP0913
SAE/ISO Operating Controls Selector
Note: See page 3-9 for SAE/ISO joystick operation.
The SAE/ISO selector is located inside the front of the
chassis at the top of the swing cylinder opening. See
(1), Figure 3-14. The machine has been set at the fac-
tory for SAE standard operation shown in the top pho-
tograph. If ISO operation is desired, loosen wing nut
(2) and rotate to the position in the bottom photograph
and retighten wing nut (2).
Figure 3-14 SAE/ISO Selector
Throttle Lever
The engine speed is controlled by the throttle lever (1)
located behind the left joystick. See Figure 3-15.
•
Push throttle lever (1) forward to decrease engine
speed.
•
Pull throttle lever (1) rearward to increase engine
speed.
Figure 3-15 Throttle Lever
Optional Auto-Idle Feature
Serial Numbers AG00573 and Up
Press switch (1) to enable the auto-idle feature. When
the auto-idle feature is enabled, engine speed is auto-
matically lowered to idle when no hydraulic functions
occur for five seconds. Engine speed resumes when a
hydraulic function is activated.
Figure 3-16 Auto-idle switch
1
1
SAE/ISO Selector in ISO Position
SAE/ISO Selector in SAE Position
2
2
1
1
Summary of Contents for 383Z
