Printed in U.S.A.
3-5
918196/EP0913
Pos.
Description
28
Hydraulic oil filter indicator (red)
– Hydraulic oil filter indicator light comes on when hydraulic oil filter requires servicingor while the
hydraulic oil is cold.
29
Engine air filter indicator (red)
– Air filter indicator light comes on when air filter requires servicing.
30
Battery charge fault indicator (red)
– Battery charge indicator light comes on when the ignition is turned on and goes off when the
engine starts. If the indicator light comes on while the engine is running, the battery is not charging, indicating a faulty charging circuit in
the alternator or problems with the V-belt.
NOTE:
a faulty V-belt affects cooling pump operation, which can lead to overheating and more
serious engine problems. Shut off the engine IMMEDIATELY and determine the cause if this indicator comes on when the engine is run-
ning.
31
Engine coolant temperature indicator (red)
– Coolant temperature indicator light comes on if coolant temperature rises above specifica-
tion.
32
Not assigned
33
Glow plug indicator (yellow)
– Glow plug indicator light comes on when the ignition key is in the glow plug activation position. Indicator
will go out when the glow plugs have heated sufficiently to start the engine.
34
Hourmeter
– Indicates the total operating hours of the machine. Use the hourmeter to track maintenance in the maintenance log.
35
Fuel level gauge
– The fuel level gauge shows the amount of fuel in the tank.
36
Engine oil pressure indicator (red)
– Engine oil pressure light comes on when the ignition is turned on and goes off as soon as the
engine is running. During normal operation, this indicator should remain off. The indicator will light if the engine oil pressure drops too low.
If this occurs, shut off the engine IMMEDIATELY and determine the cause of the pressure drop.
37
Indicator light
– Not assigned
38
Hydraulic oil temperature indicator light
– Hydraulic oil temperature indicator light comes on when hydraulic oil is too hot.
39
High-speed switch (transport speed)
– Pressing the switch will enable high travel speed.
40
Work light switch
– Press switch to the ON position to turn on the boom work light.
41
Ventilation fan (two-speed)
– Press the two-position switch to turn on the ventilation fan. Pressing switch to the first position is the low
fan speed position, and the second position is the high fan speed position. If the heater control (cab model only) is in the heating position,
this switch functions as the cab heater ON/OFF switch.
42
Air conditioning (option, cab only)
– Press the switch to turn on the air conditioning.
43
Proportional control status indicator (option)
– Indicates proportional control operation.
44
Windshield wiper switch (cab models only)
– Pressing the two-position switch to the first position turns on the windshield wiper. Press-
ing and holding the switch indicator in the second position activates the washer fluid pump.
45
Roof lights (option)
– Press switch to the ON position to turn on the roof light lights.
46
Rotating beacon (option)
– Press switch to the ON position to turn on the boom work light.
47
Auto-idle switch (option)
– Enables optional auto-idle feature. See page 3-11.
Summary of Contents for 383Z
