Gehl 383Z, Operator'S Manual

Page: 49 / 112

Printed in U.S.A. 3-7 918196/EP0913
Ignition Key Switch
Note: The engine can only be started if the left control
lever console is pivoted down into the operation posi-
tion.
With the key in the fully counter-clockwise “P” posi-
tion, all power is shut off. The key can be inserted or
removed when the switch is in this position.
With the key in the “0” position, power to the acces-
sory circuit is turned on. The key can be inserted or
removed when the switch is in this position.
With the key in the “I” position, power is turned on to
all controls and electrical circuits. The battery charge
indicator light and the oil pressure indicator light will
come on.
With the key in the “II” position, the glow plug indica-
tor will come on while the glow plugs warm intake air
in cold weather.
With the key turned fully clockwise “III” and held in
position, the engine will crank/start. The indicator
lights should go out when the engiine starts. Release
the key after the engine starts (the key returns to the “I”
position when it is released after starting the engine).
Note: The key must always be returned to the “I” posi-
tion between attempts to start the engine in order to
activate the glow plug system.
Figure 3-5 Ignition Key Switch
Battery Disconnect Switch
A battery disconnect switch is located in the engine
compartment under the hood. The switch allows elec-
trical lockout of all functions of the excavator. See Fig-
ure 3-6. To disconnect battery and lockout all electrical
functions, turn key (1) of the battery disconnect switch
counter-clockwise to position (2) and remove it. To
reconnect battery and turn on all electrical functions,
insert key (1) into the battery disconnect switch and
turn clockwise to the notched position (3).
Figure 3-6 Battery Disconnect Switch
0
P I
II
III
1
3
2