Printed in U.S.A.
3-1
918196/EP0913
CHAPTER 3 – OPERATION
OPERATING CONTROLS
Machine Orientation
All references to “right” and “left” are determined from
the operator's position facing forward.
Guards and Shields
Whenever possible, guards and shields are used to pro-
tect potentially hazardous areas on the machine. In
many places, decals are also provided to warn of poten-
tial hazards or to display special operating procedures
(see
Chapter 2 – Safety
).
The left operator’s console should be raised to enter
and exit the cab. In the raised position, the console
locks out all hydraulic functions of the machine. See
Figure 3-1.
Figure 3-1 Operator’s Left Console in Lock-out
Position
WARNING
•
Read and understand this entire man-
ual. Follow warnings and instructions
for operation and maintenance. Failure
to follow instructions can result in injury
or death.
•
Read and understand all safety decals
before operating the machine. DO NOT
operate the machine unless all factory-
installed guards and shields are in
place.
•
Be sure you are familiar with all safety
devices and controls before operating
the machine.
•
Know how to stop the machine before
starting.
•
Use only with approved accessories or
referral attachments. The manufacturer
cannot be responsible for safety if the
unit is used with non-approved attach-
ments.
•
Check for correct function after adjust-
ments or maintenance.
Summary of Contents for 383Z
