Gehl 383Z, Operator'S Manual

Page: 102 / 112

918196/EP0913 4-28 Printed in U.S.A.
During Storage
About once each month, connect the battery and check
all fluid levels to make sure they are at the proper level
before starting the engine.
Start the engine and allow it to run until it warms up
and then move the machine a short distance to help
relubricate the internal parts. Run the engine until the
battery has a chance to recharge and then shut it off.
After Storage
After removing the machine from storage and before
operating it, perform the following:
1. Replace and re-connect the battery.
2. Wipe off grease (and any adhering dirt) from cylin-
der rods.
3. Check V-belt tension.
4. Check all fluid levels and top-off as necessary.
5. Start the engine. Observe all indicators. If all indi-
cators are functioning properly and reading nor-
mally, move the machine outside.
6. When outside, park the machine and let the engine
idle for at least five minutes.
7. Shut off the engine and walk around machine.
Make a visual inspection looking for evidence of
leaks.
8. Review and re-familiarize yourself with all safety
precautions starting on page 4-1.
9. Follow the starting and warm-up procedures
according to starting on page 3-16.
IMPORTANT
If it is desired to operate the hydraulic cylin-
ders at this time, BE SURE to wipe the pro-
tective grease (and any adhering dirt) from
the cylinder rods prior to starting the
engine. After operating, BE SURE to recoat
the cylinder rods with grease if the machine
is to be returned to storage.