Gefen EXT-CU-LAN, User Manual

Page: 76 / 168

page | 66
B
asic Oper
ation
Front Panel Operation
12. Press the ▲ or ▼ buttons to select the Subnet Mask setting. The subnet mask
address will be displayed.
13. Press the OK button to edit the current selection. The first digit of the address will
flash.
14. Use the numeric keypad to enter the desired subnet mask.
If one or more digits in the subnet mask is less then three digits in length, then preceding
zeros must be used to pad the value. For example, if one of the numbers is 10 , then
you would enter 010 on the keypad. If the number is 5 , then you would enter 005 .
The cursor will automatically advance to the next digit in the subnet mask. If an error
is made, use the ◄ or ► to move backward or forward between each digit.
15. Press the OK button to save the change.
subnet mask:
_
55.255.255.000
LAN
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
®
subnet mask
255.255.255.0
Important
Any time a setting has been changed, the “please reboot unit” message will
be displayed. However, it is not required to reboot the unit until all desired
changes have been made. All changed settings are “saved” but will only be
applied once the unit is rebooted.
IP address:
10.5.64.75
B
asic Oper
ation
B
asic Oper
ation