Gefen EXT-CU-LAN, User Manual, Page: 53 / 168

page | 43
5. Enter the name of the preset in the Name field. This is required.
6. Click the drop-down list, under the
Inputs
column, and select the desired input.
Only one input can be selected. In this example, we only have one Sender unit
connected and we will select it.
For demonstration purposes, our group only contains one input and one output.
The input(s) and output(s) that are displayed in this dialog box will be determined by
the devices which have been assigned to the Associated Inputs and Associated
Outputs
column under the
Group
menu.
When creating user presets, only one input can be selected for each output that is
listed. Only inputs can be selected. Outputs cannot be selected when creating a
preset. If you wish to change the availability of an output, under the Outputs
column, go the
Groups
menu and change the list of
Associated Outputs
, as desired.
See Creating Groups (page 28) for more information.
7. Click the Save button to save the changes to the preset.
8. Click the Cancel button to close the New preset dialog box.
9. After the preset has been saved, a button will appear (with the provided name),
under the Presets - User column, near the bottom of the page.
B
asic Oper
ation
Using Presets