Gefen EXT-CU-LAN, User Manual, Page: 62 / 168

page | 52
Adding Outputs
When you initially route an input to an output, only one output can be selected. To route the
current input to additional outputs, use the Add button in the route details screen.
1. From the route details screen, press the Add button.
2. Use the << or >> buttons to scroll through each of the available outputs.
If no other outputs are available, then the following screen will be displayed. If this
is the case, press the BACK button to return to the route details screen. Additional
outputs can be added and configured using the Web interface.
3. Once the desired output is selected, press the SEL button to add the output.
4. Repeat steps 2 -3 to continue adding outputs.
5. Complete the process by pressing the BACK button.
6. Press the INT button to initialize the new routing configuration.
B
asic Oper
ation
Front Panel Operation
LAN
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
®
route details
in out add int
LAN
Matrix Controller
Status
IR
Power
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
®
viewsonic
(( back sel ))
no remaining outputs
back
B
asic Oper
ation