Gefen EXT-CU-LAN, User Manual

Page: 18 / 168

page | 8
Ge
tting S
tar
ted
Ge
tting S
tar
ted
Introduction
Setting the IR Channel
1. Remove the battery cover on the bottom of the IR remote control unit.
2. Locate the DIP switches, below the battery compartment.
3. Use the table, below, to set the IR remote control to the desired IR channel.
4. Replace the battery cover.
_
+
_
+
Information
In order for the IR remote control to function properly, both the Matrix
Controller and the IR remote control must be set to the same IR channel.
IR channel DIP switch setting
0
1
2
3
1 2
ON
1 2
ON
1 2
ON
1 2
ON
DIP switches