manualshive.com logo in svg

Geely MK Series, Owner'S Manual

Share
Download
Geely MK Series Owner'S Manual Download Page 31

Warning

   

In order to prevent the baggage 

from sliding forward, do not place the 
objects higher than the seatback. Try 
to position the baggage or case & bag 

close to the floor.

   

Do not allow any one to sit in the 

extended baggage compartment which 
is not designed for passengers. The 
passengers should sit in their own seats 
and fasten the seat belt, otherwise they 
will be badly injured in case of emer-
gent brake or collision.

   

Don’t place any object on the 

cargo tray behind the rear seatback, 
otherwise the object will be dropped 
and may cause body injuries in case of 
emergent brake or unexpected. 

Warning

9. Engine Hood

Open the engine hood

1.   Pull the engine hood lock control han-

dle, the engine hood will flip up slightly.

Make sure the engine hood is closed and 
locked before driving, otherwise the en-
gine hood may be opened abruptly and 
result in accident. 

2.   In the front of the vehicle, pull up the 

auxiliary lever and lift the engine hood.

  24

Part I

Summary of Contents for MK Series





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands