Geely MK Series, Owner'S Manual

Page: 167 / 188

Notice

Be careful not to spill oil onto vehicle.

Do not fill too much oil, or engine
may be damaged.

Check the oil level again after refill.
4. Check Oil Levels
Engine Lubricant
MR479Q
MR479QA
MR481QA
JL481Q
3.5
(dry fill)
Volume
(L)
Engine Models
Oil quality
class
3.0
(change oil filter)
2.8
(without changing
oil filter )
API SG or
above
If the oil level is lower or a little higher than
minimum oil level, fill in more oil of the same
type into the engine.
Take the oil filler cap off, add a small volume
of oil every time, and inspect the engine oil
dipstick. We suggest the use of funnel.
The oil volume required is between the mini-
mum and maximum oil level marks on the
dipstick.
When oil level is within the correct range, put
the oil filler cap on, and tighten it with hand.
Check Oil Level
Under engine working temperature, shut down
the engine, and check oil level with engine oil
dipstick.
1. To ensure accuracy, park the vehicle on a
flat surface, and wait for several minutes
after the engine is shut down to allow oil to
gather at the bottom of the engine.
2. Pull out the engine oil dipstick, and put its
end on a cloth and wipe it clean.
3. Insert the engine oil dipstick as close to the
bottom as possible.
When the oil level falls within the correct range,
install the oil filler cap and tighten it manually.
If not, the display of oil level is incorrect.
4. Pull out engine oil dipstick, put its end on
a cloth and check oil level.
Notice
There will be serious engine malfunction
caused by insufficient oil, if oil level is
not checked on a regular basis.
Oil Type
The recommended oil shall conform to the
standard GB11121, its quality grade shall
be API SG level or above. Oil viscosity:
SAE10W-30 or SAE10W-40, and SAE5W-30
shall be used in cold areas in winter.
Warning
Please pay attention not to touch hot
exhaust pipe.
160
Part VI