manualshive.com logo in svg

Geely FC, Workshop Manual

The Geely FC Workshop Manual is a comprehensive guide designed to assist car owners in maintaining and repairing their vehicle. With easy-to-follow instructions and detailed diagrams, this manual ensures a hassle-free experience. Download it for free from manualshive.com and enhance your car's performance without any professional assistance.

Share
Download
background image

Electric sunroof (optional)--Sunroof system

Inspection for sunroof function

1. Inspection for sliding opening function.

(1) Turns ignition switch to ON, when spot contacting sunroof

switch keystroke 2, the sunroof will start automatic sliding

opening work, and it does not stop until it is at complete

opening state. If spot contacting it in running process, or

pressing keystroke 1 or 2 for long time, sunroof glass will

stop running immediately.

(2) Turns ignition switch to ON, when pressing keystroke 2 for

Sunroof system

Specification for sunroof function

1. Operation category

Spot contact: press the keystroke one time, then release immediately (the time is less than 0.3 seconds).

Long press: press the key stroke for long time (the time is more than 0.3).

2. Specification for function.

Anti-clamping function: spot contact the keystroke to make the sunroof could face 10 Kg resistance in the

process of closing from any position, at this time, electric motor turns oppositely, and the sunroof returns

turn-up or opening state.

Automatic closing function: when the key is pulled out from ignition locker, at this time, the sunroof is not

at closing state, it will close automatically in three seconds.

long time, the sunroof will start automatic sliding opening work, and it does not stop until it is at

complete opening state. If releasing keystroke 2 in running process, the sunroof glass will stop  running

immediately.

2. Inspection for sliding closing function.

(1) Turns ignition switch to ON, if the sunroof is at opening state, when spot contacting sunroof switch

keystroke 1, the sunroof will automatically slide to closing state. If spot contacting it or pressing

keystroke 1 or 2 for long time in running process, sunroof glass will stop running immediately.

(2) Turns ignition switch to ON, if the sunroof is at opening state, when pressing sunroof switch keystroke

1 for long time, the sunroof will automatically slide to closing state. If releasing keystroke 1 in running

process, sunroof glass will stop running immediately.

3. Inspection for turn-up opening function

(1) Turns ignition switch to ON, if the sunroof is at closing state, when spot contacting sunroof switch

keystroke 1, the sunroof will automatically move to turn-up opening state. If spot contacting it again or

pressing keystroke 1 or 2 for long time in running process, sunroof glass will stop running immediately.

(2) Turns ignition switch to ON, if the sunroof is at closing state, when pressing sunroof switch keystroke

1 for long time, the sunroof will automatically slide to turn-up opening state. If releasing keystroke 1 in

running process, sunroof glass will stop running immediately.

4. Inspection for turn-up closing function

(1) Turns ignition switch to ON, if the sunroof is at turn-up opening state, when spot contacting sunroof

switch keystroke 2, the sunroof will automatically move to closing state. If spot contacting it again or

pressing keystroke 1 or 2 for long time in running process, sunroof glass will stop running immediately.

(2) Turns ignition switch to ON, if the sunroof is at turn-up opening state, when pressing sunroof switch

keystroke 2 for long time, the sunroof will automatically slide to closing state. If releasing keystroke 2

in running process, sunroof glass will stop running immediately.

 364 

Front

Rear

Summary of Contents for FC




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FC

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
Daihatsu TERIOS J100 Maintenance Manual preview
TERIOS J100
Brand: Daihatsu Pages: 43
Ecco EW4010 Installation And Operation Instructions Manual preview
EW4010
Brand: Ecco Pages: 9
Ecco EW4009 Installation And Operation Instructions Manual preview
EW4009
Brand: Ecco Pages: 9
TATA Motors Indigo Owner'S Manual & Service Book preview
Indigo
Brand: TATA Motors Pages: 164
iDataLink maestro Pr 2 Install Manual preview
maestro Pr 2
Brand: iDataLink Pages: 99
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
DAVIS 8126GD User Manual preview
8126GD
Brand: DAVIS Pages: 32
Wagan 2227-1 User Manual preview
2227-1
Brand: Wagan Pages: 8
Thermo King T- series Driver Manual To Simple Operation preview
T- series
Brand: Thermo King Pages: 2
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
Xpresskit DBALL2-HYUNDAI9 Installation And Quick Reference Manual preview
DBALL2-HYUNDAI9
Brand: Xpresskit Pages: 13
RAM 2011 3500 Chassis Cab User Manual preview
2011 3500 Chassis Cab
Brand: RAM Pages: 92

Brands by name

Popular brands

Load more brands