Geely FC, Workshop Manual

Page: 365 / 419

Rear chair (fixing type)
Overhaul
Hint: When assembling, please work by the sequence
opposite with disassembling sequence, but when it has
items that need to pay special attention, it will add special
specification.
1. Disassemble rear row chair cushion assembly.
Pull rear row chair cushion assembly upwards, then disas-
semble it.
Note: when disassembling, it is necessary to hold the
bracket at two sides of fixing clasp, then pull it upwards
to prevent it from distorting.
2. Disassemble rear row chair backrest assembly
[68010076]
Disassemble three bolts and rear row chair backrest assembly.
3. Disassemble rear chair head pillow assembly
[68010077]
4. Disassemble exterior cover of rear row chair
backrest.
(a) Disassemble head pillow bracket.
(b) Disassemble the clamp, then disconnect exterior cover of
rear row chair backrest with gasket.
5. Disassemble exterior cover of rear row chair cushion.
Disassemble the clamp, then disconnect exterior cover of cush-
ion with gasket.
6. Assemble exterior cover of rear row chair cushion.
Use new clamp to assemble exterior cover of rear row chair
cushion in gasket.
Hint: Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior
cover of cushion from crinkling.
7. Assemble exterior cover of rear row chair backrest.
Use new clamp to assemble exterior cover of rear row chair
backrest in gasket.
Hint: Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior
cover of cushion from crinkling.
8. Assemble rear row chair backrest assembly
[68010076]
Torque: 8.0 N
·
m
Chair--Rear chair (fixing type)
Locking loop pliers
Locking loop pliers
A: 100mm
354