GEDA 14830, Assembly And Operating Manual

Page: 11 / 92

Rack and pinion hoist
Assembly and Operating Manual 11 / 92 BL054 GB Edition 08.2015
1.6.1 Requirements of assembly personnel
The machine may only be assembled, operated and maintained by
qualified persons who, based on their training, knowledge and practical
experience, can guarantee proper handling and who are aware of the
risks associated with the construction hoist. These persons must be
appointed to the tasks of installation, dismantling and maintenance by
the operating company.
1.6.2 Operating personnel
The machine may be operated only by persons who, based on their
training, knowledge and practical experience, can guarantee proper
handling.
These persons must
−
have been appointed by the operating company.
−
have been appropriately instructed and informed about the risks.
−
be familiar with the assembly and operating manual.
−
observe national regulations
1.6.3 Improper use
• Transporting persons is prohibited!
−
Only authorised persons are permitted to ride the platform, and only
for the purposes of assembly and servicing work. Special measures
are required for such operations.
−
Use the front fall protection.
−
Operation during assembly work may only be carried out using the
assembly control from the load platform.
• The
500 Z
is not designed for permanent installation.
• The
500 Z
must not be constructed to be free-standing (without
anchors).
• Persons without instruction on the machine, who are not familiar with
the operating instructions or children must not operate it.
Consequences of improper use of equipment
−
Danger to life and limb of the user or a third party.
−
Damage to the machine and other tangible assets.