GEDA 14830, Assembly And Operating Manual

Page: 42 / 92

Rack and pinion hoist
Assembly and Operating Manual 42 / 92 BL054 GB Edition 08.2015
4.6 Requirements of the installation site
4.6.1 Foundation
• The foundation must be horizontal and have sufficient load bearing
capacity.
−
The foundation must be compacted according to the ground load
[kN/m²]
(refer to assembly height).
• Depending on the assembly height, for example, wooden planks or
steel sheeting, can be used as load distributing base supports.
4.6.2 Ground pressure
• The total weight (see table) of the hoist and ladder sections are
transferred to the foundation via the foot section support under the
ladder track.
−
Total weight of the scaffold list; (cpl. with ladder brackets).
Load capacity: 500 kg
Mass per mast section:
(with anchoring and cable guide)
48 kg
Length per mast section: 1.5 m
Height of base unit: 2.3 m
Empty weight of the base unit with load
platform and cable bin (100 m):
approx. 615 kg
Base area without base support
(0.5 mx0.5 m)
0.25 m²
Assembly height in
m
10 20 30 40 50 60 70 80 90 100
Total weight (kg) 1589 1906 2290 2660 2977 3361 3731 4063 4432 4802
Ground pressure
(kN/m2)
64 77 92 107 120 135 150 163 178 193