GEDA 14830, Assembly And Operating Manual

Page: 61 / 92

Rack and pinion hoist
Assembly and Operating Manual 61 / 92 BL054 GB Edition 08.2015
7.4 Operating the hoist

The platform must be turned towards the trolley and latched into
place. The ramp must be closed and the assembly guard plate
must be up and secured.
• Rotate the main switch to the position “ I ”.
• Turn the key in the key switch of the
platform control to the left (position
Operation) and remove the key.

The manual control (ground control) and electric modules (if there
are any) on the landing-level safety doors are active.

A warning signal (horn) will sound for ascent and descent during
the first 2 m safety height.
Dead man's control
• Selector switch (2) to position “ I ”
−
The load platform moves only as long as the
UP (3) or DOWN (4) buttons are pressed.
−
The platform overruns the limit switch
approach bar for the landing level stop and
is stopped by the UP limit switch, or at the
mast and by the Emergency limit switch.
1 = EMERGENCY STOP button
2
1
3
4