10.6.5 Assembly balancer plug
Fig.46
Tools required:
•
Hex socket key
Carry out the following steps:
1.
Insert the seal ring (65) into the housing.
2.
Position the balancer plug (92) into the housing.
3.
Grease the thread of the clamp connections (43) and install.
®
! Ensure that the clamp connection is firmly installed.
®
! Observe torques, see table “Tightening torques'', Section 10.6.1, Page 69
®
Done
10.6.6 Fit the sterile lock
Fig.47
Tools required:
Maintenance
Installation
430BAL009261EN_2
78
17.04.2023
