P = Compressed air supply
Y1 = Air connection with external main stroke connection with plug (23)
Y2 = Discharge, lift valve disk
Y3 = Discharge, lift double-seat disk
Hint!
For an optimal fit at the air connection, it is necessary to cut the
pneumatic hoses at a right angle with the hose cutter.
6.7
Electrical connection with T.VIS control top
Danger
Live parts
Electrical shock can result in serious personal injury or death.
► Only allow properly qualified staff to carry out work on the electrical
equipment.
► Prior to establishing electrical connections check the maximum
permissible operating voltage.
Explosive gases or dusts
An explosion can result in serious personal injury or death.
► Observe the installation and operating regulations for use in potentially
explosive areas!
Carry out the following steps:
1.
Connect in accordance with the connection diagram and the instructions in
the Operating Instructions for T.VIS control tops.
®
Done
Hint!
The initiators are factory set. During transport and installation it can
happen that the settings are changed, so that readjustment may be
required (see the instruction manual for the control top).
6.7.1
Adjustment of the control top
6.7.1.1 Control top T.VIS A-15 adjustment
Assembly and installation
Electrical connection with T.VIS control top
430BAL009261EN_2
36
17.04.2023
