– 61 –
4. Lift the housing from the 2 slots in the bottom of
the system tray.
5. Lift the fan motor from the fan housing.
6. Disconnect the fresh food condenser fan motor
wire harness located near the front of the
system tray.
Fan Housing
Condenser Fans
The fresh food and freezer condenser fans are
located in the machine compartment between the
compressors and the condensers.
To remove the fresh food condenser fan:
1. Remove the toeplate and vent panel. (See
Toekick and Vent Panel
.)
2. Place the system tray in the 16-inch position.
(See
System Tray
.)
3. Remove the 2 Phillips-head screws that attach
the fresh food condenser fan housing to the top
of the center divider.
To remove the freezer condenser fan:
1. Remove the fresh food condenser fan. (See
To
remove the fresh food condenser fan
, follow
steps 1 thru 4.)
2. Remove the 2 Phillips-head screws that attach
the freezer condenser fan housing to the left
side of the center divider.
3. Pull the housing from the 2 slots in the back of
the center divider.
4. Lift the fan motor from the fan housing.
5. Disconnect the freezer condenser fan motor
wire harness located near the front of the
system tray.
Fan Housing
Note:
Each condenser fan will run on a 9-volt
battery for testing purposes. Use jumper wires to
connect the red fan wire to the positive battery
terminal and the blue fan wire to the negative
battery terminal.
