– 21 –
Sabbath Mode
The Sabbath Mode was designed for use on the Jewish
Sabbath and Holidays. The Sabbath Mode feature makes
it possible for observant Jews to refrigerate and freeze
food during the duration of the holiday.
The Sabbath Mode feature can be set to override typical
reactions caused by your interaction with the refrigerator
or wine reserve. While in the Sabbath Mode, your
refrigerator or wine reserve will still operate. However,
the refrigerator or wine reserve will not respond to your
actions.
While in the Sabbath Mode, you may notice the fan
running when the door is opened, however, this is
not a result of your actions. The fan will operate at
predetermined times. The defrost heater will continue
to defrost the refrigerator (or wine reserve) and freezer
and will be activated on a timer. The defrost heater will
not defrost as a result of door openings or any consumer
actions. In case of power loss, Sabbath mode is retained
in memory to ensure the unit restarts to the same
settings as before the power loss.
Note:
Sabbath mode cannot be activated when the unit
is in the System Cooling OFF state.
To activate the Sabbath Mode, hold down the
ALARM
button and
(+)
pad on the control panel for 5 seconds.
SAB
will be displayed on the control.
SAB
will remain in
the display and the
(+)
pad and alarm button will remain
lit.
DISPLAYS, ALARMS and LIGHTS
―
The main temperature
control displays will be deactivated, therefore they will
not be lit, sound a tone or operate when touched. Door
alarms and lights will be disabled.
ICEMAKER
―
The icemaker will continue to operate. The
icemaker can be disabled by turning the icemaker
OFF
prior to the Sabbath. (See
Automatic Icemaker
.)
To deactivate the Sabbath Mode, hold down the ALARM
button and (+) pad on the control panal for 5 seconds.
Upon exit from the Sabbath Mode the unit will resume the
last operating mode.
Showroom Mode
The Showroom Mode enables normal light and control
functions while disabling the cooling system.
While in the Showroom Mode, the compressors, fans, and
dampers stay off at all times.
Changes to temperature settings for each zone are
allowed. The Door alarm and control Lock features will be
in normal operating mode.
To activate the Showroom Mode, hold down the
ALARM
button and
(-)
pad on the control panel for 5
seconds.
SHO
will be displayed on the control panel.
After 5 seconds “SHO” will disappear and the ambient
temperature will be displayed. Setting the temperature to
maximum will cause the display to show “SHO” instead of
the normal “OFF”. In the event of a power failure the unit
will restore to showroom mode upon the return of power.
To deactivate the Showroom Mode, hold down the ALARM
button and (-) pad on the control panal for 5 seconds.
Upon exit from the Showroom Mode the unit will resume
the last operating mode.