– 36 –
6. Remove the 4 Phillips-head screws from the
bottom of the evaporator panel.
4. Remove the two T-25 Torx screws at the bottom
of each shelf track.
5. Remove the two T-25 Torx screws at the top of
each shelf track and remove the tracks.
Note:
In the following step, a gasket attached to
the bottom of the Styrofoam™ evaporator cover
seals the bottom of the cover to the front lip of the
evaporator drain channel. To prevent breakage,
care should be taken when removing the evaporator
cover.
8. Carefully pull the Styrofoam evaporator cover
out of the cabinet.
7. Remove the 3 Phillips-head screws from the top
of the evaporator panel, and then pull the panel
out of the cabinet.
