– 44 –
Note:
In the following step, a foam insulation block
is located behind each side of the mullion.
6. Note the orientation of the side foam insulation
blocks, and then grasp and pull the mullion out
approximately 4 inches.
7. Disconnect the convertible drawer LED light and
the center mullion heater wire harnesses.
Note:
When reconnecting these harnesses, if the
convertible drawer LED light connector will not latch
onto the connector, reverse the connections.
8. Pull the center mullion from the cabinet.
Note:
The center mullion front cover and mullion
heater are available as separate parts.
Disconnect
Icemaker
The temperature set range on this drawer is from
-6° to +6° F.
The freezer drawer contains an ice bin on the left
and a storage area on the right.
Reed Switch
Bearing Retainer
Magnet
The ice bin contains a magnet that activates a reed
switch on the bottom of the icemaker when the
drawer is closed. Due to the location of the icemaker,
to harvest ice, the ice bin must be locked into the
left-most position in the drawer.
(
Continued next page
)
