– 16 –
Control Features
Temperature Controls
The temperature display shows the actual temperature
of the fresh-food compartment (wine reserve for wine
reserve models), freezer drawer or customizable
drawer
when each one is selected by toggling the Zone
indicator. The actual temperature will vary from the set
temperature based on factors such as frequency of door
openings, amount of food, defrost cycling and room
temperature.
NOTE:
Frequent door openings or doors left open for
periods of time may increase the internal temperature of
the compartments temporarily.
To turn off the cooling system,
toggle the ZONE indicator
to the fresh-food mode (wine mode for wine reserve
models). Press the plus (+) pad until the display shows
OFF. The (+) key will not be illuminated on the display and
the LED lighting will operate when the unit is in the OFF
mode. All other loads will be turned off.
To turn the cooling system on,
toggle the ZONE indicator
to the fresh-food mode (wine mode for wine reserve
models), and press the minus (–) pad until the desired
temperature is displayed. The preset temperature of 0°F
for the freezer or 37°F for the fresh-food unit will appear
in the display on refrigerator models.
To check the current temperature setting for a
compartment,
press the plus (+) or minus (–) pad once.
After 5 seconds, the display will return to the actual
temperature.
Fresh Food – Solid Door Unit
Fresh Food – Glass Door Unit
Wine – Upper Compartment
Wine – Lower Compartment
Upper Drawer – Freezer
Lower Drawer – Customizable
To change the temperature settings,
press the plus
(+) or minus (–) pad for each increment to the desired
temperature set point. Allow 24 hours for the unit to
reach the temperature you have set.
34°F
1°C
46°F
8°C
Fresh Food
Temperature Ranges
–6°F
–21°C
+6°F
–14°C
Freezer
Drawer
40°F
4°C
65°F
18°C
Low
High
Wine
-6°F
–21°C
34°F
1°C
40°F
4°C
+6°F
–14°C
46°F
8°C
55°F
13°C
Customizable Drawer Temperature Ranges
Freezer
Chill
Wine
Low
High
NOTE:
Setting the controls to
OFF
stops cooling, but
does
not
shut off electrical power to the unit. All readings in °C
will be rounded.
(
Continued next page
)
