GE Voluson Swift Instructions For Use Manual Download Page 173

Page: 173 / 344

Select

Volume Analysis

and select SonoAVC™

follicle

Select

manual

Start the measurement by selecting either

Left Ovary

Right Ovary

The green measurement cross appears in the middle of the image.

Select the desired measurement tool.

•

Ellipse

8.1.1.

Position the start-point of the long diameter with the Trackball and press

Set

8.1.2.

Position end-point of the long diameter with the Trackball and press

Set

8.1.3.

If desired press

Change

to adjust the start- and end-point.

8.1.4.

Adjust the short diameter with the Trackball press

Set

8.1.5.

To start the next measurement move the Trackball and continue with

step 1.

•

2 Dist.

8.2.1.

Position the start-point of the long diameter with the Trackball and press

Set

8.2.2.

Position end-point of the long diameter with the Trackball and press

Set

8.2.3.

If desired press

Change

to adjust the start- and end-point.

8.2.4.

Move the Trackball and so the green measurement cross appears.

8.2.5.

Position the start-point of the short diameter with the Trackball and

press

Set

8.2.6.

Position end-point of the short diameter with the Trackball and press

Set

8.2.7.

To start the next measurement move the Trackball and continue with

step 1.

Is the measurement finished?

•

no: adjust the sect. plane A with parallel shift to achieve the next wanted

measurement slice position and continue with step 8.

•

yes: continue with next step

10. Select

Add to Report

to save the measurements to the current exam.

Follicle Measurement Method:

semi auto

Scan and freeze a follicle volume data set.

Select

Volume Analysis

and select SonoAVC™

follicle

Select

semi auto

Start the measurement by selecting either

Left Ovary

Right Ovary

Measure all wanted follicles on the current plane.

5.1.

Position the system cursor over the follicle to be measured and press

Add/

Rem.

5.2.

If selected in the main menu, the found trace with its corresponding color and

number is displayed.

5.3.

Position the system cursor over the next follicle to be measured and press

Add/Rem.

Is the measurement finished?

•

no: adjust the sect. plane A with parallel shift to achieve the next wanted

measurement slice position and continue with step 5.

3D and 4D Mode

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4

8-41

Summary of Contents for Voluson Swift

























































































































































































































































































































































Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands

GE Voluson Swift, Instructions For Use Manual

Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands