GE Voluson Swift Instructions For Use Manual Download Page 108

Page: 108 / 344

6.2.7 Pulsed Wave Doppler (PW)

PW Doppler is typically used for displaying the speed, direction, and spectral content of blood

flow at information.

Figure 6-7 PW-Mode: Scan Mode and Read Mode

Using PW Doppler

Touch

on the user interface to start B-Mode.

Optimize the B-Mode image.

Touch PW on the user interface to start PW Doppler Mode.

The

PW Main

menu appears.

Hint

To change PW Gain rotate the 2D-button (only in run mode).

Info

Also see

PW Menu

Display Format

Select the desired display format.

RT Trace

Real Time Trace on/off

Angle

Angle correction. The blood flow velocity calculation based on the incident angle of

the ultrasound onto the axis of the vessel can be determined this way.

Cine #

Select the desired Cine #.

Speed

Changes the speed at which the timeline is swept.

2D Mode

6-14

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use

5831612-100 Revision 4

Summary of Contents for Voluson Swift

























































































































































































































































































































































Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands

GE Voluson Swift, Instructions For Use Manual

Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands