GE Voluson Swift Instructions For Use Manual Download Page 195

Page: 195 / 344

•

Voluson Format(*.4dv)

•

V730 format (V730.mdb)

Using Import

Press

Import

to start importing data.

Select

•

the data type

•

the location of the file you want to import data from

•

import preview from USB

Confirm by pressing

Open

Import preview from USB

It is possible to review and/or reload data directly from the selected location. In reload state

you can

Send

and

but not

Save

. When

Save

is selected following message pops up:

"SAVE not possible! Exam must be imported first".
After closing this window with "OK" another dialog appears. It tells the user to press

Import

again should he want to copy the data to the hard drive permanently (restore).
Possible to import:

•

selected patients

•

selected exams

•

selected image and volume data

All data contained in the 4DV file or the V730.mdb file is displayed in the Archive window

under the source category “4DV”. The user can now select the patients and exams that he

wants to import.If an encrypted 4DV file is selected, a password prompt appears. The entering

of a wrong password causes an error message.
Selecting the

Import

again and copying the data to the hard drive. If files are missing/corrupted

and cannot be imported/restored, a warning appears.

Importing from a DICOM Server (Query Retrieve)

Exams, patients and images from a DICOM Server can be imported after

Query/Retrieve was performed. It is only possible to import complete exams

or patients, not single selected images. If no images are available, the

Import

button is disabled.

9.2.5 Delete

Deleting patients, images or exams

Select the data (patient(s), exam(s) and/or image(s)) to delete.

Press

Delete

on the screen.

A dialog appears which asks for confirmation to delete the selected items.

Controls

Delete Images only

Selected image(s) will be deleted.

Delete All Data

All selected data will be deleted.

Cancels deleting data.

Archive

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4

9-11

Summary of Contents for Voluson Swift

























































































































































































































































































































































Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands

GE Voluson Swift, Instructions For Use Manual

Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands