GE Voluson Swift Instructions For Use Manual Download Page 40

Page: 40 / 344

Frequency:

•

2.4 GHz to 2.5 GHz CCK and CFDM

modulation

•

5 GHz OFDM, 802. 11ac MCS0-9 coding

scheme

Supported Standards:

•

FCC Part 15

•

Japan MIC

•

Canada Requirements

•

RED (Radio Equipment Directive)
Directive 2014/53/EU

•

KC (South Korea)

•

NCC (Taiwan)

•

RCM (Australia, NewZealand)

•

SRRC (China)

Enabled Host-to-Host communication protocols:

•

NTP - Network Time Protocol (only used as client)

•

DNS – Only used as client.

•

DHCP – Only used as client.

•

NetBIOS – Name, Datagram, Session services, Network file share MS network. Only

used as client.

•

Insite ExC – Device servicing by GE Remote Service.

•

SMTP - Simple Mail Transfer Protocol. Used only to send email.

•

Syslog - Only used as log source

•

LDAP ( Lightweight Directory / Access Protocol ) - Only used as client

•

Tricefy Uplink - direct upload to Tricefy

•

ACR/NEMA Digital Imaging and Communications in Medicine (DICOM

)

○

DICOM Conformance Statement: http://www.gehealthcare.com/usen/

interoperabillity/dicom/products/ultrasound_dicom.html

○

IHE Integration Statement : http://www.gehealthcare.com/usen/interoperabillity/

ihe.html

Network interface technical specifications

Physical and link layer interface

Ethernet IEEE 802.3 10BASE-T, 100BASE-TX

and 1000BASE-T

Internet Protocal Version:

IPv4

3 DICOM is the registered trademark of the National Electrical Manufacturers Association for its standards publications
relating to digital communications of medical information.

Safety

2-26

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use

5831612-100 Revision 4

Summary of Contents for Voluson Swift

























































































































































































































































































































































Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands

GE Voluson Swift, Instructions For Use Manual

Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands