GE Voluson Swift Instructions For Use Manual Download Page 14

Page: 14 / 344

Indications for Use Statement for US FDA

Voluson™ SWIFT / Voluson SWIFT+ are a general-purpose diagnostic ultrasound system

intended for use by a qualified and trained healthcare professional for ultrasound imaging,

measurement, display and analysis of the human body and fluid. Voluson™ SWIFT / Voluson

SWIFT+ clinical applications include: Fetal/Obstetrics; Abdominal (including renal and GYN/

Pelvic); Pediatric; Small Organ (Breast, Testes, Thyroid, etc.); Neonatal Cephalic; Adult

Cephalic; Cardiac (Adult and Pediatric); Peripheral Vascular (PV); Musculo-skeletal

Conventional and Superficial; Transrectal (including Urology/Prostate) (TR); Transvaginal

(TV).
Mode of operation include: B, M, PW Doppler, CW Doppler, Color Doppler, Color M Doppler,

Power Doppler, Harmonic Imaging, Coded Pulse, 3D/4D Imaging mode, Elastography and

Combined modes: B/M, B/Color, B/PWD, B/Power/PWD. The Voluson™ SWIFT / Voluson

SWIFT+ are intended to be used in a hospital or medical clinic.

Regulatory remarks

•

First CE marked in 2020.

•

Federal law restricts this device to sale by or on the order of a physician!

•

This machine must be used in compliance with the law. Some jurisdictions restrict certain

uses such as gender determination, contrast imaging, IVF, PUBS or CVS, etc. Please

consider the local laws and regulations.

•

The equipment conforms with regulations for electrical safety IEC 60601 and safety class

IIa according to the MDD 93/42/EEC regulation for use on human patients.

The manufacturer, assembler, importer or installer consider themselves responsible regarding

safety, reliability and performance of the equipment under the following conditions:

•

Authorized personnel has performed installation and initial start-up of the system.

•

Options or new settings have only been added by authorized personnel.

•

Authorized personnel has performed modifications or repairs.

•

The local electric installation complies with the national regulations.

•

The equipment is only used according to the Instructions for Use.

•

Paper copy : The EU commission Regulation on electronic instructions for use of medical

devices in the European Union demands, that a paper copy of Instructions for Use can

be ordered at no additional charge. You may therefore, send a request to

[email protected]. This request will be treated within 7 days.

Importer Information

•

Türkiye İthalatçısı

GE Medical Systems Türkiye Ltd. Şti.
Esentepe Mah. Harman Sok. No: 8
34394 Şişli İstanbul Türkiye

General

1-10

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use

5831612-100 Revision 4

Summary of Contents for Voluson Swift

























































































































































































































































































































































Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands

GE Voluson Swift, Instructions For Use Manual

Search results

Summary of Contents for Voluson Swift

Reviews:

Related manuals for Voluson Swift

Brands by name

Popular brands