GE Vivid S5 N, Service Manual

Page: 606 / 834

GE
P
ART
N
UMBER
FN091065, R
EVISION
2 VS5 N
AND
VS6 N
S
ERVICE
M
ANUAL
8-80 Section 8-3 - Control Console Components Replacement Procedures
P R E L I M I N A R Y
8-4-8-1 Tools
Use the appropriate flat and Phillips-type screwdrivers, Hex wrench keys, and a No. 10 Torx
screwdriver.
8-4-8-2 Preparation
Shut down the Vivid S5 N or Vivid S6 N ultrasound unit, as described in 4-2-3 "Power Shut Down" on
page 4-7 .
8-4-8-3 Extended Keyboard Removal Procedure (New-type Operator Panel)
1.) Remove the trackball from the Keyboard Assembly.
2.) Remove the Keyboard Assembly, as described in the “Keyboard Assembly Removal Procedure” on
page 8-39 .
3.) Remove the Keyboard Bottom Cover, as described in the “Keyboard Bottom Cover Removal
Procedure” on page 8-59 .
4.) Uninstall trackball housing as described in the “Mechanical Trackball and Housing Removal
Procedure” on page 8-71 .
5.) Disconnect the seven cables - refer to the illustration in Figure 8-97 on page 8-83 .
Figure 8-94 Extended PCB Keyboard (Top left: spare On/off switch and screen sensor)
Replacement
On/Off Switch
Replacement
Screen
Sensor