D
IRECTION
5813707-100, R
EVISION
2
V
ENUE
™ S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures
8-19
P R E L I M I N A R Y
8-2-7-5
Fan Installation Procedure
1.) Install the fan in its place.
2.) Tighten the five holding screws.
3.) Route the fan cable beneath the wifi antenna cables and connect the fan cable to the C-FEB.
4.) Route the two Wi-Fi antennas cables through the two cable holders on the left side of the fan.
5.) Route the speakers cables through the two cable holders on the right side of the fan.
6.) Install the Magram cover. Make sure that the Magram folded end if fitted into the gap between
C-FEB and C-BEB boards.
7) Install C-PSB.
8.) Install back cover.
Figure 8-93 Magram folded end
•
•
Summary of Contents for Venue Go
Page 323: ......
