D
IRECTION
5813707-100, R
EVISION
2
V
ENUE
G
O
™ S
ERVICE
M
ANUAL
Chapter 4 - General Procedures and Functional Checks
4-25
P R E L I M I N A R Y
4-3-7-2-3
Cart Tilt/Swivel Movement Test
Verify cart’s cradle tilt and swivel movement:
1.) Tilt movement:
•
Verify forward and backward tilt is possible while system is docked, making sure movement is
smooth reaching end position on both sides.
•
Verify the forward scanner tilt is 10°± 2°
•
Verify the forward scanner tilt is 40°± 2°
•
Verify the scanner tilt force from the scanner sides or upper handle is min: 2.5Kg and max: 4.5Kg
(initiate small movement) while the scanner is mounted on a fully assembled cart.
2.) Swivel movement:
•
Bring the cart to the most upper position. Verify left and right swivel is possible until end position
while system is docked, making sure movement is smooth.
•
Verify the max horizontal scanner left/right tilt (Swivel) range from forward direction is at least 140°±
5° to each side while the height is higher than 86 cm
•
Verify the scanner left or right rotate force from the scanner sides is min: 2Kg and max: 3Kg (initiate
small movement) while the scanner is mounted on a fully assembled cart.
Figure 4-65 Cradle Tilt and Swivel Movement
Summary of Contents for Venue Go
Page 323: ......
