GE Transport PT878, Abridged Manual

Page: 48 / 97

Operation 3-11
August 2008
Customizing the Softkeys
(cont.)
Setting a Softkey from the Target Menu:
1.
Press the
[MENU]
key at the lower right of the PT878 keypad. The
Menu Bar replaces the Status Bar at the top of the screen.
2. Navigate to the desired menu (see the Menu Maps in Appendix A
for guidance).
3.
Use the [
T
] or [
S
] arrow keys to move to scroll to the desired
menu option.
4.
Press the desired softkey. A window appears with the question,
“Assign current menu command to FKeyX?”
5.
Press [F3] (Yes) to confirm the assignment and close the window.
(Press
[F2]
(No) to close the window without changing the key.)
Clearing a Softkey:
1.
Press the [MENU] key at the lower right of the PT878 keypad. The
Menu Bar replaces the Status Bar at the top of the screen.
2.
With the Site Menu highlighted, press
[ENTER]
to open the Site
Menu window (see Figure 3-6 on page 3-7).
3.
Use the [
T
] or [
S
] arrow keys to move to the FKeys option and
press
[ENTER]
. A screen similar to Figure 3-8 on page 3-9 appears.
4.
Use the [
T
] or [
S
] arrow keys to move to the desired Clear FKey
(F1, F2 or F3) option on the menu. Press
[ENTER]
.
The meter returns to Operate Mode , and the corresponding softkey is
now cleared.
Note:
A softkey can also be cleared in the Configure FKey window
(see Figure 3-9 on page 3-10) by selecting the Clear option
and pressing
[ENTER]
and then
[F3] (OK)
.