GE Transport PT878, Abridged Manual

Page: 42 / 97

Operation 3-5
August 2008
The Limits Option (cont.)
For a bar graph display, skip the following steps and proceed directly
to the final paragraph below. For a line graph display, complete the
following additional steps:
1. Scroll to the text box for the x-axis interval value and press
[ENTER]
to open the box.
2.
Use the numeric keys to enter the desired interval value and press
[ENTER]
to confirm the value.
3. Scroll to the text box for the x-axis units and press
[ENTER]
to open
the box.
4.
Use the numeric keys to enter the desired interval units (seconds,
minutes, hours, or days) and press
[ENTER]
to confirm the choice.
5. The final three menu options permit you to configure some of the
display details:
a.
If you want to use lines to connect the data points, scroll to the
Use Lines option and press
[ENTER]
to select it.
b. If you want to show the average value for the displayed
parameter, scroll to the
Plot Average value option and press
[ENTER]
to select it.
c.
If you want to show the minimum and maximum values for the
displayed parameter, scroll to the
Show Minimum and
Maximum option and press
[ENTER]
to select it.
Press
[F3]
(OK) to confirm your selections and return to Operate
Mode . When you return to Operate Mode , the screen will display any
changes you have made. Otherwise, you can press [F2] (Cancel) or the
[ESC]
key to exit the Format Menu without confirming your
selections.