GE TMO2D, User Manual

Page: 45 / 102

TMO2D Digital Display User’s Manual 37
Chapter 4. Basic Programming
4.7.3 Relays Test? (cont.)
Note:
Upon selecting the OFF option and pressing [YES], the relay will turn off, and the selection brackets will skip
to ON. Upon selecting the ON option, the relay turns on, and the selection brackets skip to OFF.
4.8 The Calibration Menu
The fifth main menu, the Calibration Menu, enables you to enter measurement parameters and calibration data into the
TMO2D.
The Calibration Menu includes five submenus:
•
Select Response?
•
Select Compensation?
•
Gas Calibration?
•
Pressure Calibration?
•
Auto Cal Parameters?
(Refer to Figure 28 on page 81 and Figure 29 on page 82 for a flow diagram of the Calibration Menu.)
Turn Relay A:
on [OFF] done
Use the [NO] or arrow keys to select “DONE.” Press [YES] to confirm the selection.
Select Relay to test:
[A] B C D done
Use the [NO] or arrow keys to select “DONE” again, and press [YES] to confirm the
selection and exit.
TESTS
Relays Test? Press [NO] to exit the Relays Test.
TESTS
Done?
Press [YES] to exit the submenu.
MAIN MENU
Tests? Press [NO] to proceed to the next Main Menu title — the Calibration Menu.