LOGIQ 7/LOGIQ 7 Pro Quick Guide
Direction 5307393-100 Rev. 1
39
Safety
CAUTION
Do not use this equipment if a safety problem is known to exist. Have the unit repaired and performance verified by qualified service
personnel before returning to use.
Smoke &
Fire Hazard
The system must be supplied from an adequately rated electrical circuit. The capacity of the supply circuit must be as specified in
Chapter 3
of the
Basic User Manual
.
Biological
Hazard
For patient and personnel safety, be aware of biological hazards while performing invasive procedures. To avoid the risk of disease
transmission:
•
Use protective barriers (gloves and probe sheaths) whenever possible. Follow sterile procedures when appropriate.
•
Thoroughly clean probes and reusable accessories after each patient examination and disinfect or sterilize as needed. Refer to
Probes and Biopsy
in the
Basic User Manual
for probe use and care instructions.
•
Follow all infection control policies established by your office, department or institution as they apply to personnel and equipment.
CAUTION
Contact with natural rubber latex may cause a severe anaphylactic reaction in persons sensitive to the natural latex protein. Sensitive
users and patients must avoid contact with these items. Refer to package labeling to determine latex content and FDA’s March 29, 1991
Medical Alert on latex products.
CAUTION
The system is equipped with an Auto Freeze feature which disables acoustic output and freezes the image when the system is not in use.
Take care when deactivating this feature.
CAUTION
When you move the Control Panel up/down with the monitor, place BOTH hands on the Control Panel. Touching other moving parts other
than the Control Panel may cause personal injury.
CAUTION
Never put any device onto the monitor.
