LOGIQ 7/LOGIQ 7 Pro Quick Guide
Direction 5307393-100 Rev. 1
41
Safety
Device Labels
Label Icon Description
The following table describes the purpose and location of safety labels and other important information provided on the equipment.
Table 1-2: Label Icons
Label/Icon
Purpose/Meaning
Location
Identification and Rating Plate
Manufacture’s name and address
Date of manufacture
Model and serial numbers
Electrical ratings (Volts, Amps, phase, and frequency)
See “Warning Label and Caution Label
Locations” on page 55.
Type/Class Label
Used to indicate the degree of safety or protection.
IP Code (IPX8)
Indicates the degree of protection provided by the enclosure per IEC60 529. Can be used in operating room
environment.
Foot Switch
Type BF Applied Part (man in the box) symbol is in accordance with IEC 878-02-03.
Probe and PCG marked Type BF
Type CF Applied Part (heart in the box) symbol is in accordance with IEC 878-02-03.
ECG marked Type CF
!
“ATTENTION” - Consult accompanying documents” is intended to alert the user to refer to the operator manual
or other instructions when complete information cannot be provided on the label.
Various
“General Warning Sign”
Rear panel and UPS battery
“Warning” - Dangerous voltage” (the lightning flash with arrowhead) is used to indicate electric shock hazards.
Rear panel and inside of console
“Mains OFF” indicates the power off position of the mains power breaker.
Refer to
Chapter 3
in the
Basic User Manual
for
location information.
