LOGIQ 7/LOGIQ 7 Pro Quick Guide
Direction 5307393-100 Rev. 1
27
Using CINE
Activating CINE
Press
Freeze
, then roll the
Trackball
to activate CINE. To
start CINE Loop playback, press Run/Stop. To stop CINE
Loop playback. press Run/Stop.
To activate Timeline CINE, press
Freeze
, press
Scan
Area
, then roll the
Trackball
to activate CINE.
Quickly Move to Start/End Frame
Press
First
to move to the first CINE frame; press
Last
to
move to the last CINE frame.
Select all
Press
Select All
to select all frames of cineloop.
Select numbers of heart cycles
Press left or right arrow to select the number of heart
cycle to review.
Select the heart cycle
Rotate the Cycle select knob clockwise/counterclockwise
to select the heart cycle of interest.
Synchronize the cine loops.
1.
Scan and freeze for the first cine loop.
2.
Press
L
or
R
to display dual display mode.
3.
Scan and freeze for the second cine loop.
4.
Press
Synch mode
to start the synchronization.
Start Frame/End Frame
Turn the
Start Frame
dial to the left to move to the
beginning of the CINE Loop. Turn the dial to the right to
move forward through the CINE Loop.
Turn the
End Frame
dial to the right to move to the end of
the CINE Loop. Turn the dial to the left to move backward
through the CINE Loop.
Adjusting the CINE Loop Playback Speed
Turn the
Loop Speed
dial clockwise/counter-clockwise to
increase/decrease the CINE Loop playback speed.
Disconnecting B-Mode CINE from Timeline
CINE
To review the B-Mode CINE Loop only, press
Cine Mode
Selection
and select
B Only
.
To review the Timeline CINE Loop only, press
Cine Mode
Selection
and select
TL Only
.
To return to linked B-Mode and Timeline CINE Loop
review, press
Cine Mode Selection
and select
B/TL
.
Moving through a CINE Loop
Frame By Frame
Turn
Frame by Frame
to move through
CINE memory one frame at a time.
Cine Capture
Selecting
Cine Capture
will search through all images
between the start frame and end frame and display each
peak or the highest velocity/tissue power. Adjust the start
frame and end frame points to limit the image frames
used in the process.
NOTE:
Cine Capture is applied only for 2D images (B,
CF, PDI, Contrast, TAD, e.t.c.).
1.
Display the cineloop which is on-memory or recalled
from the archive.
2.
Run the cineloop.
3.
Press
Cine Capture
on the touch panel to display
captured image.
4.
If necessary, save the captured image.
5.
Press
Cine Capture
again to off.
Enhancement.
Executes the enhancement
process to the cine capture images.
