Navigating parameter “fields”
and “digits”
•
Each screen consists of information as well as one or more fields that can be edited.
The active fields contain individually adjustable digits or characters.
•
Certain digits are also linked to their neighbouring digits. For example, three of the
four digits in the voltage field can each be adjusted individually, but when adjusting
the value from 1000 to 990, for instance, even though only the ten’s place is adjusted
manually, three digits are affected.
•
Whether individual or linked, digits “wrap around,” so increasing from 9 produces 0
and decreasing from 0 produces 9—until a parameter limit is reached.
Ettan IPGphor 3 can be programmed in volt-hours (Vhr) or hours and minutes in step-n-
hold or in gradient mode. Any values within the operating limits listed above can be used.
74
Ettan IPGphor 3 Operating Instructions 28-9635-51 AC
5 Operation
5.3 Perform a run from the control panel
5.3.2 Protocol parameters
