Position the IPG strips in the
manifold
Follow the instructions below to position the IPG strips in the manifold.
Action
Step
Transfer the strips to the Ettan IPGphor Cup Loading Manifold.
1
Position the strips under the cover fluid face up in the tray with the anodic
(+, pointed) end of the IPG strip pointing at the anode of Ettan IPGphor 3.
2
Center the strip down the length of the manifold channel. Protrusions along
the sides guide the strip approximately straight, although some manual
adjustment of the strip may be necessary. See also the Ettan IPGphor Cup
Loading Manifold User Manual.
3
Ettan IPGphor 3 Operating Instructions 28-9635-51 AC
61
5 Operation
5.1 Preparations before start
5.1.2 Use the Ettan IPGphor Cup Loading Manifold
