This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequen-
cy energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be re-
quired to correct the interference at his own expense.
Regulatory compliance of
connected equipment
Any equipment connected to Ettan IPGphor 3 Isoelectric Focusing System should meet
the safety requirements of EN 61010-1/IEC 61010-1 or relevant harmonized standards.
Within the European Union, connected equipment must be CE-marked.
Environmental conformity
This product conforms to the following environmental requirements.
Title
Requirement
Restriction of Hazardous Substances (RoHS) Directive
2011/65/EU
Waste Electrical and Electronic Equipment (WEEE) Directive
2012/19/EU
Administration on the Control of Pollution Caused by Electronic
Information Products, China Restriction of Hazardous Sub-
stances (RoHS)
ACPEIP
Registration, Evaluation, Authorization and restriction of
CHemicals (REACH)
Regulation (EC)
No 1907/2006
Ettan IPGphor 3 Operating Instructions 28-9635-51 AC
11
1 Introduction
1.3 Regulatory information
