User Manual
Druck DPI620G-IS
29 July 2016
116M5464 Revision -
Page 16 of 248
Electrical warnings
1.4.4
•
To prevent electrical shocks or damage to the
instrument, do not connect more than 30V CAT I
between the terminals, or between the terminals and the
ground (earth). Any connection must be compliant with
the terminal input/output parameters.
•
External circuits should have appropriate insulation to
the mains.
•
This instrument uses a Lithium-Ion (Li-Ion) battery pack.
To prevent an explosion or fire, do not short circuit, do
not disassemble, and keep safe from damage.
•
To prevent an explosion or fire, use only the GE specified
battery (IO620G-IS-BATTERY), power supply (Part:
IO620G-PSU) and battery charger (Part: IO620G-IS-
CHARGER).
•
To prevent battery leakage or heat generation, only use:
-
the battery charger (IO620G-IS-CHARGER ) and
power supply IO620G-PSU in the temperature
range 0°C to 40°C (32°C to 104°F).
•
The power supply IO620G-PSU input range is 100 –
240Vac, 50 to 60Hz, 250mA, installation category CAT II.
•
Note that the operating and storage temperature range
of the power supply (IO620G-PSU) does not match that
of the DPI620G-IS battery charger. (IO620G-PSU
operating temperature range 0°C to +40°C, storage
temperature range -40°C to +70°C).
•
Position the power supply so as not to obstruct the
supply disconnecting device.
