manualshive.com logo in svg

GE DPI620G-IS, User Manual

Share
Download
GE DPI620G-IS User Manual Download Page 15

User Manual 

Druck DPI620G-IS

 

29 July 2016 

116M5464 Revision - 

Page 15 of 248 

 

General Warnings 

1.4.3

• Do not use tools on the instrument that might cause

incendive sparks – this could cause an explosion if used
in a Hazardous Area.

• Provide additional protection for equipment that may be

damaged in service.

• It is dangerous to ignore the specified limits for

the instrument or its related accessories. This can
cause injuries.

• Use equipment only for the purpose for which it is

provided.

• If the equipment is used in a manner not

specified by the manufacturer, the protection
provided by the equipment may be impaired.

• Make sure all equipment is serviceable.

• Wear all applicable Personal Protective Equipment (PPE).

• Do not use sharp objects on the touch-screen.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 

TestEquipmentDepot.com 

Summary of Contents for DPI620G-IS

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands