Chapter 1
Programming
3
Accessing programming menus
To access the programming menus using a KTD-405 keypad, do the following:
1. Switch the keypad to the camera site you want to program (
Figure 2
).
2. Press and hold the
set
key until the
Enter programming code
display appears.
3. At the code entry display, enter the programming code
9
,
5
, and
1
. Then press the
seq
button.
4. At the first menu display, press
3
.
5. At the
Enter camera site number
screen, enter the site number of the camera you wish to program.
Figure 2. KTD-405 keyboard
At this point, you have access to the CyberDome II programming menus. For more information on the
programming menus, see
Accessing programming menus
on page 3.
Navigating menus with the keypad
You can use multiple methods to navigate through the menu system with your keypad. Use either the keypad
joystick, or the pause or play buttons to move up or down and advance through the menu systems.
When you have the desired menu option selected, use either the joystick or the
seq
button to pan right to
advance. You may also be able to press the number associated with your desired menu selection to proceed to
highlight that option or the next menu.
Note:
When you press the number associated with an option and there is a value to set, you will automatically be asked to set
that value. If there is no value to set, when you press the number associated with an option, that option will be selected
and you will proceed to the next menu.
The arrow indicator identifies the property that will be changed. To change a setting, press the
iris +
button. If
you change the setting of the property the arrow indicator is on and advance to the next menu, the setting will
be saved. Alternatively, you may be able to use the
zoom +
button to advance.
Note:
The alternative methods to navigate and select may not work in all menus or with all controlling devices.
When you’re in a menu, use the joystick and pan left to back out of the menu screen. When you’re performing
a function, like setting a mask, or setting an area title, press the
iris -
button to back out of the function to a
menu screen.
Summary of Contents for CyberDome II
