GE CyberDome II, User Manual, Page: 21 / 60

Chapter 1
Programming
13
Day/night switch
Set the level at which the camera’s infrared filter automatically switches in and out at dawn and dusk
(
Figure 14 ). The light level switch point is adjustable, but should be set only during dawn/dusk conditions.
Note: This menu will only be present if the camera supports day/night switching.
Figure 14. Day/night switch
• Select option 2 to use the KTD-405 keypad to manually activate the switch.
• Select option 3 to switch based on a sensor in the camera.
• Select option 4 to switch based on a sensor on the PTZ tilt arm.
If you select the PTZ tilt arm sensor, you’ll have to indicate at which level you want the switch to happen
(
Figure 15 on page 13).
Figure 15. Switch level