Chapter 1
Programming
35
5. For each step programmed, the following information must be entered:
•
The preset number (1 to 128).
•
The dwell time at each step (1 to 127 seconds). The default dwell time is 2 seconds.
•
The speed at which the camera moves between presets. There are three speed settings: SLW
(slow), MED (medium), and FST (fast). Press the
iris +
to cycle through the speed settings.
•
The zoom level (freeze (FZ) or zoomed out (ZO)).
•
The title (TTL) (on or off).
6. To finish programming a tour, press the
iris -
key. The
PTZ tour programming
menu displays.
7. Navigate to option two to play the tour, to verify, and press the
iris +
to exit back to the previous menu.
ShadowTour
CyberDome II cameras have
ShadowTour
capability. A
ShadowTour
is a tour that the camera “learns” by
recording up to five minutes of manual
P
,
T
, and
Z
operation. Use a keypad to manually direct your camera
through the desired PTZ movements, and the camera stores in memory the movements you performed. This
recorded tour can be replayed at any time.
To program a new
ShadowTour
, do the following:
1. Navigate to option
5
from the
Program select
menu (
Figure 7
on page 8). The
PTZ tour programming
menu displays (
Figure 45
on page 33).
2. Pan right with the joystick to advance to the
PTZ tour programming
menu that displays
ShadowTours
(
Figure 46
on page 34).
3. Select the tour to be created.
4. Select
1
to select
New tour
.
5. Press
iris +
to start the timer.
6. Move the camera through the desired movements.
7. Press
iris +
to save
ShadowTour
, stop the timer, and exit back to the
ShadowTour
menu.
8. Press
iris -
to exit back to the
PTZ tour programming
menu.
9. Repeat steps 2 through 8 for more
ShadowTour
programming. Otherwise, press
iris-
until you exit
back to the
Program select
menu.
To review an existing
ShadowTour
, do the following:
1. Select option
5
from the
Program select
menu (
Figure 7
on page 8). The first menu to display is the
PTZ tour programming
menu (
Figure 45
on page 33).
2. Press
Fast forward
, or pan right with the joystick to advance to the
PTZ tour programming
menu that
displays
ShadowTours
.
3. Select the tour to be reviewed.
4. Select
3
to play the tour.
5. The tour will play indefinitely until stopped by a key or joystick movement.
6. Press
iris-
to exit back to the
PTZ tour programming
menu.
Summary of Contents for CyberDome II
